Rated 4.8 on Trustpilot

Read Reviews

Illustration of an older grey string inverter with a small display on a garage wall

·

Faults & Servicing

ABB and Power-One Aurora Inverters: Faults, Support and Replacement

ABB and Power-One Aurora inverters were fitted on many UK homes during the Feed-in Tariff years. Here is what their messages mean, where support stands, and your options when one fails.

By

Solar Panels London

·

Last reviewed

ABB and Power-One Aurora inverters, such as the PVI and UNO models, were fitted on many UK homes in the 2010s, and many are now 10 to 15 years old. Some messages on the display are normal, such as low input at dawn and dusk. Others point to a fault in the panels, the wiring or the inverter itself. If the inverter has failed, replacing it with a modern hybrid inverter is often the best value, because it lets you add a battery at the same time. We inspect these systems and, where replacement is needed, usually upgrade to Solis, FoxESS or Hanchu equipment.

Key points

  • Power-One made the Aurora range, ABB bought Power-One in 2013, and ABB’s solar inverter business moved to FIMER in 2020.

  • Many units in the UK are reaching the typical inverter age of 10 to 15 years.

  • “Sun Low” or a low-input message at dawn, dusk or in heavy cloud is normal.

  • A red light or an insulation or ground fault warning needs an engineer.

  • Internal error messages usually mean the inverter itself has failed.

  • Replacement is a good moment to add a battery.

A short history of the brand

The Aurora range was made by Power-One. ABB bought Power-One in 2013 and continued the range under the ABB name. In March 2020, ABB’s solar inverter business passed to FIMER, which went through financial difficulties in 2022 before being restructured. That history matters because it affects warranty claims, parts and support for older models. Our guide to what to do when your inverter brand is no longer supported explains how to check support for your model.

What the messages mean

Older Aurora inverters show short messages on the display, with codes starting W for warnings and E for errors. The common ones, from the manufacturer’s manuals, are:

  • Sun Low. Input voltage is too low to start. Normal early, late and on very dull days. If it shows all day in good light, the panels or wiring need checking.

  • Input OV or Input UV. Input voltage is too high or too low. Usually a panel or wiring issue. If the panels check out, the inverter may be at fault.

  • Input OC or Out OC. Overcurrent on the input or output side. Needs an engineer.

  • Int. Error. An internal fault. If it comes back after a restart, the inverter has usually failed.

  • A red light or ground fault. The insulation between the panels or cables and earth may have broken down. This needs an engineer, and you shouldn’t touch the DC cabling or isolators.

  • Grid messages. Grid voltage or frequency outside limits, or the grid missing. Usually a supply problem rather than an inverter fault. Our guide to why an inverter shuts down on sunny days explains grid voltage trips.

The exact wording varies by model, so check the manual for yours.

Illustration of an inverter with a red warning light lit beside a small display

What you can safely check yourself

  1. Note the exact message and when it appears.

  2. Check whether the problem is only at the start and end of the day.

  3. Check the AC isolator and the solar circuit breaker in your consumer unit are on.

  4. Look at your generation meter or monitoring to see when output stopped.

Don’t open the inverter, remove covers or work on the DC isolators or roof cables. Solar panels produce dangerous DC voltage whenever there is daylight.

Repair or replace?

On a unit that is 10 years old or more, replacement is usually better value than repair, especially if parts or support are uncertain. When we inspect a failed Aurora, we first check the panels and wiring, so the fault isn’t simply moved to a new inverter.

Request an inverter replacement quotation

Inverter failed or on its way out? Send your details and we’ll call you back to talk through the options.

We install across London and up to around 50 miles out.

About your system (optional, helps us prepare)

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

Your replacement options

  • Like-for-like replacement. A new string inverter of a similar size. Simplest, and keeps the system as it was.

  • Hybrid inverter. Runs the panels and is ready for a battery now or later. We usually fit Solis, FoxESS or Hanchu hybrids. Our Solis guide and Hanchu battery guide explain them.

  • Hybrid inverter and battery together. One visit, one set of paperwork.

Our page on inverter replacement explains how the work is done.

Illustration of an old inverter being replaced by a new hybrid inverter with a battery beside it

If you’re on the Feed-in Tariff

Ofgem’s rules allow a failed inverter to be replaced without losing your FIT, but your FIT licensee should be told before and after. A hybrid replacement changes how generation is metered, and our standard practice is to fit a bidirectional meter, subject to checking your system. Our guides to replacing an inverter on a Feed-in Tariff system and keeping your Feed-in Tariff when you upgrade explain the details.

Frequently asked questions

Is my ABB inverter still under warranty?

Probably not, if it was fitted in the 2010s. Even where an extended warranty was bought, the brand’s changes of ownership can make claims harder. Check your paperwork and the manufacturer’s current support pages.

Can you repair an ABB or Aurora inverter?

We inspect and diagnose them. Where the inverter itself has failed, we usually recommend replacement, because of its age and the uncertainty over parts and support.

Can I add a battery and keep my ABB inverter?

If it’s working well, yes, with an AC-coupled battery alongside it. If it’s old or faulty, replacing it with a hybrid at the same time is usually better value. Our guide to whether an old solar system is worth upgrading helps you decide.

How do I know which model I have?

The model is on a label on the side of the inverter, for example PVI-3.6-TL-OUTD or UNO-3.0-TL-OUTD. A photo of the label helps us quote accurately.

Get your inverter checked or replaced

Our battery retrofit and solar upgrade service covers inverter replacement and adding a battery. Request an inverter replacement quote and send us a photo of the label and any message on the display.

Book a solar system inspection

Tell us what’s happening and one of our team will call you back to arrange a visit.

We install across London and up to around 50 miles out.

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

Latest Articles

Ready to Start Saving with Solar?

Get your free no-obligation quote today. Our experts will design the perfect system for your home.

Free Home Survey

MCS Certified

Reply in 1 Working Day

© 2026 Solar Panels London. All rights reserved.

SOLAR PANELS LONDON (SPL) LIMITED, registered in England and Wales, company number 14360308. Registered Office, 20 Rosslyn Crescent, Luton, LU3 2AU. SOLAR PANELS LONDON (SPL) LIMITED is an Introducer Appointed Representative of Shermin Finance Limited, FRN 727594, company number 01276121. Registered Office, Homeserve, Cable Drive, Walsall, WS2 7BN. Shermin Finance Limited act as a credit broker and is not a lender. Credit is subject to status and affordability.