Rated 4.8 on Trustpilot
Read Reviews


·
Faults & Servicing
Why Is My Solar Battery Charging From the Grid?
A battery that charges from the grid isn’t always a fault. Often it’s a schedule or a setting doing its job. Sometimes it’s a sensor reading the wrong way. Here is how to tell which.
By
Solar Panels London
·
Last reviewed
A solar battery charging from the grid is usually doing what it has been told to do. The most common reasons are an overnight charging schedule set up for a cheap tariff, or a setting that tops the battery up when it falls to a minimum level. If it happens at odd times, or the battery charges from the grid while the panels are exporting, the cause is often the current sensor (CT clamp) that tells the system what is flowing through your meter. That needs an engineer.
Key points
Scheduled charging on an overnight tariff is normal, and usually intended.
Many systems top up from the grid if the battery falls to a set minimum charge level.
A battery that charges from the grid while your panels are exporting usually points to a sensor or settings problem.
A CT clamp fitted the wrong way round, or in the wrong place, makes the system misread import and export.
Check the app and your settings first. Leave the meter cupboard and wiring to an engineer.
Is it actually a problem?
Start by asking when it happens.
Overnight, at the same time every night: almost certainly a charging schedule.
Only when the battery is very low: probably a minimum charge or backup reserve setting.
During the day, while the panels are producing: worth investigating.
Your bill or smart meter shows more import than you’d expect: worth investigating.
Cause 1: an overnight charging schedule
If you’re on a time-of-use tariff, such as one with a cheap overnight window, the battery is often set to charge from the grid during that window and power the house later. That is the point of those tariffs. Our guide to Octopus Flux and overnight battery charging explains how this works.
Things to check in your app:
Is grid charging, time-of-use or force charging turned on?
Do the charging times match your tariff’s cheap window?
Did the times shift by an hour when the clocks changed? Some systems don’t adjust automatically.
Did you change tariff but not the schedule?

Cause 2: a minimum charge or backup reserve
Many systems keep a reserve in the battery, either to protect the battery or to keep power for a power cut. If the battery falls below that level, the inverter may top it up from the grid. For example, Solis’s manual for its AC-coupled inverters says that, with grid charging allowed, the battery is charged from the grid when it drains to the force charge level, or during a time-of-use window when there isn’t enough solar.
If your reserve is set high, the battery will spend more time topping up. Check the reserve or minimum charge setting in your app and whether it suits how you use the system.
Cause 3: the CT clamp
A CT clamp is a small sensor that clips around the main cable near your electricity meter. It tells the inverter whether your home is importing from the grid or exporting to it. The battery uses that to decide when to charge and when to discharge.
If the clamp is fitted the wrong way round, the system sees import as export and the other way round. It may charge the battery from the grid when it thinks you’re exporting, or discharge to the grid when it thinks you’re importing. If the clamp is on the wrong cable, has come loose, or its lead is damaged, the readings can be wrong or missing.
Signs of a CT problem:
The battery charges while the panels are clearly exporting.
The app shows the house exporting at night, or importing on a sunny afternoon with little running.
Your smart meter disagrees with the app.
A sensor or meter alarm on the inverter.
Some inverters can reverse the CT reading in the settings, but checking and fixing the clamp should be done by an engineer, because it sits next to the live supply cables in the meter cupboard. Don’t move or unclip it yourself.

Book a solar system inspection
Tell us what’s happening and one of our team will call you back to arrange a visit.
We install across London and up to around 50 miles out.
Cause 4: the battery’s own management
Some batteries occasionally charge fully to balance their cells or recalibrate their charge reading. This is normally infrequent and described in the manufacturer’s documentation. If it seems to happen often, it’s worth having the system checked.
What you can safely check yourself
Look at the app’s timeline for a day when it happened. Note the times and whether the panels were producing.
Check the work mode, grid charging, time-of-use schedule and reserve settings.
Compare the charging times with your tariff’s cheap window.
Compare the app’s import and export with your smart meter or bill.
Write down any alarms or error messages on the inverter screen or in the app.
Don’t open the inverter, battery or meter cupboard, and don’t touch the CT clamp or any cabling.
When to call an engineer
The battery charges from the grid during the day while the panels are exporting.
The app’s import and export don’t match your meter.
There is a sensor, meter or communication alarm.
You’ve checked the settings and it still happens.
We service systems whoever installed them. Our guide to why your solar battery isn’t charging and our guide to why your battery isn’t discharging cover the opposite problems.
Frequently asked questions
Is it bad for the battery to charge from the grid?
No. The battery doesn’t know where the electricity comes from. Charging overnight on a cheap tariff is a common, intended way of using a battery. The question is only whether it is charging when you meant it to.
Why does my battery charge from the grid in winter?
In winter the panels produce much less, so the battery gets little solar charge. If you have an overnight schedule or a reserve setting, grid charging becomes a bigger share. Our guide to whether solar panels work in winter explains the seasonal difference.
Can a wrongly fitted CT clamp affect my Smart Export Guarantee payments?
Your SEG payments come from your supply meter, not the CT clamp. But a misread CT can make the battery export when you didn’t intend it, or import more than necessary. It’s worth fixing.
My battery is old and the settings are confusing. Is it worth upgrading?
If your system is older or the battery has lost a lot of capacity, an upgrade may give you better control and monitoring. Our guide to replacing a failed home battery and our battery retrofit and solar upgrade service explain the options.
Get it checked
If the settings look right and it still happens, the sensor or wiring needs checking. Book a solar system inspection and we’ll find the cause.
Book a solar system inspection
Tell us what’s happening and one of our team will call you back to arrange a visit.
We install across London and up to around 50 miles out.
Latest Articles
Ready to Start Saving with Solar?
Get your free no-obligation quote today. Our experts will design the perfect system for your home.
Free Home Survey
MCS Certified
Reply in 1 Working Day
Quick Links
Services
Contact
© 2026 Solar Panels London. All rights reserved.
SOLAR PANELS LONDON (SPL) LIMITED, registered in England and Wales, company number 14360308. Registered Office, 20 Rosslyn Crescent, Luton, LU3 2AU. SOLAR PANELS LONDON (SPL) LIMITED is an Introducer Appointed Representative of Shermin Finance Limited, FRN 727594, company number 01276121. Registered Office, Homeserve, Cable Drive, Walsall, WS2 7BN. Shermin Finance Limited act as a credit broker and is not a lender. Credit is subject to status and affordability.









