Rated 4.8 on Trustpilot
Read Reviews


·
Solar Panels
Are Solar Panels a Fire Risk? What the Evidence Shows
Solar panel fires are rare, but when they happen the cause is usually a poor connection or a failed isolator, not the panels themselves. Here is what the evidence shows and how to stay safe.
By
Solar Panels London
·
Last reviewed
Solar panels are not a significant fire risk when they are designed, installed and maintained properly. Fires involving solar systems do happen, but they are rare, and the UK’s main investigation into them found the largest identified cause was poor installation rather than the panels themselves. The parts most often involved were DC isolator switches and cable connectors. Choosing a competent installer, and having the system checked from time to time, deals with most of the risk.
Key points
Fires involving solar panels are rare compared with the number of systems in use.
A government-funded BRE investigation, published in 2017, found installation problems were the biggest identified cause.
DC isolators and DC connectors were the components most often involved.
Warning signs include a burning smell, scorch marks, crackling or buzzing near an isolator, or repeated inverter faults.
Home batteries have their own installation rules, covered in our guide to where a battery can be installed.
What the UK evidence says
The most detailed UK study is the investigation carried out by BRE (the Building Research Establishment) for the government, published in 2017. It looked at more than 50 fire incidents involving solar systems. Its main findings:
Installation problems were the largest identified cause, at around a third of cases.
Faulty products were a smaller share, and system design a smaller share again. In many cases no single cause could be identified.
DC isolators were linked to more incidents than any other component, followed by DC connectors and then inverters.
Electrical arcing, where electricity jumps across a poor or loose connection, was a recurring theme.
BRE passed its recommendations to MCS, the scheme that certifies solar installers, covering array layout, isolators and quality control on site.

Why connections matter so much
Solar panels produce direct current (DC) whenever there is daylight. DC at the voltages a solar array produces can sustain an arc across a loose or damaged connection, and that arc generates heat. The usual causes are:
Mismatched connectors. Plugs from different manufacturers that look alike but aren’t designed to fit together.
Connectors not fully pushed home, or cables pulled tight so the joint is under strain.
Water getting into an isolator mounted outdoors or on the roof.
Cables rubbing on roof edges or tiles over time.
These are installation details, which is why a careful installer matters more than the brand of panel.
Warning signs to look out for
Call an engineer if you notice any of these:
A burning or hot plastic smell near the inverter, isolator or loft.
Scorch marks or discoloured plastic on an isolator or connector.
Crackling, buzzing or popping near the solar equipment.
Repeated insulation, earth fault or arc fault messages on the inverter.
Your solar tripping the fuse box. Our guide to solar panels tripping the fuse box explains what that can mean.
Don’t open the inverter, remove covers or touch the DC cables or isolators. They can carry dangerous voltage whenever there is daylight, even with the inverter switched off.
What to do in an emergency
If there is smoke or fire, get everyone out and call 999. Tell the fire service the property has solar panels and, if you have one, a battery. You don’t need to switch anything off before leaving.
Book a solar system inspection
Tell us what’s happening and one of our team will call you back to arrange a visit.
We install across London and up to around 50 miles out.
How to keep a system safe
Use an MCS-certified installer. MCS standards cover how arrays, cables and isolators are installed. Our guide to what an MCS certificate is explains the scheme.
Have the system checked periodically. An inspection looks at connectors, isolators, cable routes and the inverter. Our guide to how often solar panels should be serviced covers timing.
Keep pigeons out. Nesting material under panels can damage cables. Our guide to pigeon-proofing solar panels explains the options.
Get faults looked at. Don’t keep resetting an inverter that reports earth or insulation faults.

What about home batteries?
Home batteries have a separate set of rules about where they can go and how they are installed. The batteries we fit use lithium iron phosphate (LFP) cells, a chemistry chosen for its stability. Our guide to where a home battery can be installed explains the PAS 63100 rules on location and fire separation.
Plug-in solar panels
Plug-in solar panels became legal to fit without planning permission in England in August 2026, with rules that rule out mounting them on wooden structures or timber cladding. London Fire Brigade has published safety advice for them. Our guide to plug-in solar vs a full installation compares the two.
On commercial roofs, insurers often expect fire safety to be considered at the design stage. Our guide to solar on warehouse and industrial roofs explains what they usually ask about.
Frequently asked questions
Do solar panels make a house fire more likely?
The evidence suggests the risk from a properly installed system is very low. Where fires have happened, the cause has most often been a poor connection or a failed isolator, which is why installation quality matters.
Can solar panels catch fire on their own?
Panels themselves rarely start fires. Problems usually begin at a connection, an isolator or the inverter.
Should I switch my solar off at night or when I go away?
There is no need for a correctly installed system. If you’re worried about a fault, have it inspected rather than switching it on and off.
Do firefighters deal with homes that have solar panels?
Yes. Fire services train for it, and telling them about solar panels and a battery when you call helps them plan.
Get your system checked
Book a solar system inspection if your system hasn’t been checked for a while, or if you’ve noticed any of the warning signs above. Our solar servicing page explains what an inspection covers.
Request a solar and battery quotation
Send your details and we’ll call you back to arrange a free survey.
We install across London and up to around 50 miles out.
Latest Articles
Ready to Start Saving with Solar?
Get your free no-obligation quote today. Our experts will design the perfect system for your home.
Free Home Survey
MCS Certified
Reply in 1 Working Day
Quick Links
Services
Contact
© 2026 Solar Panels London. All rights reserved.
SOLAR PANELS LONDON (SPL) LIMITED, registered in England and Wales, company number 14360308. Registered Office, 20 Rosslyn Crescent, Luton, LU3 2AU. SOLAR PANELS LONDON (SPL) LIMITED is an Introducer Appointed Representative of Shermin Finance Limited, FRN 727594, company number 01276121. Registered Office, Homeserve, Cable Drive, Walsall, WS2 7BN. Shermin Finance Limited act as a credit broker and is not a lender. Credit is subject to status and affordability.









