Rated 4.8 on Trustpilot
Read Reviews


·
Battery Storage
Battery Not Saving as Much as You Expected? What to Check
A battery that isn’t pulling its weight is usually set up for the wrong tariff, the wrong mode or the wrong-sized home. Here is how to work out what’s holding yours back.
By
Solar Panels London
·
Last reviewed
When a battery isn’t making the difference you expected, the cause is usually one of five things: the work mode, the charging schedule, the tariff, the battery’s size compared with your usage, or a battery that has lost capacity or has a fault. Most of these can be checked in the app before anyone visits. The answer is often a settings change, sometimes a tariff change, and occasionally more capacity or a replacement.
Key points
Check the work mode first. A battery set to prioritise export won’t do much for your bills.
Charging schedules can drift, especially after the clocks change or a tariff switch.
A battery suits a time-of-use tariff best. On a flat-rate tariff it can only shift solar.
A battery that’s too small for your evening use empties early. One that’s too large rarely fills in winter.
Older batteries lose usable capacity, and faults can stop them charging or discharging fully.
First, measure what it’s doing
Before changing anything, look at a typical week in your monitoring app:
Does the battery fill up during the day in summer?
Does it run the house in the evening, or sit full until the next morning?
When does the house import from the grid, and at what time of day?
Is the battery exporting to the grid when you didn’t intend it to?
Compare with your smart meter or bill. If the app and the meter disagree, the system may be misreading what’s flowing through the meter. Our guide to why a battery charges from the grid explains the sensor problem behind that.
1. The work mode
Most hybrid and battery inverters have several modes. The names vary, but they usually include:
Self-use. Solar runs the house, surplus charges the battery, and the battery runs the house when solar isn’t enough. This is the usual setting for saving on bills.
Feed-in or export priority. Surplus is exported first and the battery only gets what’s left. This makes the battery do very little.
Time-of-use or scheduled. The battery charges and discharges at times you set, often to match a cheap overnight rate.
Backup. A large share of the battery is held in reserve for power cuts.
If your battery barely moves, check the mode. A system left in export priority or backup mode after installation or a reset is a common cause.

2. Schedules and reserve settings
If you use scheduled charging:
Check the times match your current tariff.
Check they didn’t shift by an hour when the clocks changed.
Check the battery isn’t set to charge from the grid and then hold the charge until the next morning.
Check the minimum charge or reserve level. A high reserve leaves less of the battery available to run the house.
3. Your tariff
A battery’s value comes from using cheap or free electricity at expensive times. On a standard flat-rate tariff, the only cheap electricity is your own surplus solar, so the battery adds most in summer and little in winter. On a time-of-use tariff, the battery can also charge overnight at a cheaper rate and run the house at peak times. Our guides to whether solar batteries are worth it and Octopus Flux and overnight charging explain how tariffs change the picture.

Book a solar system inspection
Tell us what’s happening and one of our team will call you back to arrange a visit.
We install across London and up to around 50 miles out.
4. Size versus usage
Too small. The battery empties by early evening and the house imports for the rest of the night. Common after adding an electric car or heat pump.
Too large. In winter, the panels can’t fill it, so part of the capacity rarely gets used unless you charge overnight from the grid.
If your usage has grown, our guide to adding more battery storage to an existing system explains when you can extend it. Our guide to what size battery you need explains how to match capacity to usage.
5. Age and faults
Batteries lose usable capacity gradually. An older battery may simply hold less than it did. Faults can also stop a battery charging or discharging fully. Signs include:
The battery never reaches full, or stops discharging well above empty.
The charge level jumps suddenly.
Alarms in the app or on the inverter.
Our guides to why a battery isn’t charging, why a battery isn’t discharging and how long solar batteries last help you narrow it down.
When an upgrade makes sense
If your battery has failed, lost a lot of capacity, is too small for your home now, or runs on equipment that’s no longer supported, it may be time to upgrade. That might mean adding capacity, replacing the battery, or replacing an old inverter with a hybrid that gives you better control. We usually upgrade customers to Solis, FoxESS or Hanchu equipment. Our guide to replacing a failed home battery and our battery retrofit and solar upgrade service explain the options.
What not to do
Don’t change installer-level settings you don’t understand, such as export limits or grid protection settings. These are set to meet network operator rules.
Don’t open the battery or inverter.
Don’t disconnect the battery to “reset” it unless the manufacturer’s instructions tell you how.
If you have an electric car, the battery may be draining into it overnight. Our guide to why a home battery drains into an electric car explains why and how to stop it.
For other ways to make more of your generation, from timing appliances to heating water with surplus solar, see our guide to using more of your own solar electricity.
Frequently asked questions
How do I know if my battery is making a difference?
Compare a month of grid import with the battery working normally against a similar month before it was fitted, or look at the app’s self-consumption figures. Allow for the season, because solar and usage both change a lot through the year.
Should I switch tariff to get more from my battery?
Possibly. A time-of-use tariff with a cheap overnight window often suits a battery better than a flat rate. Check the peak and off-peak times fit your routine, and that your battery’s schedule matches.
Why does my battery do so little in winter?
Because the panels produce much less. Without overnight charging on a cheaper tariff, the battery has little surplus solar to store in December and January. Our guide to whether solar panels work in winter explains why.
Can you check a battery you didn’t install?
Yes. We inspect and service systems whoever installed them, and we can review the settings, the sensor readings and the battery’s condition.
Get it checked
If the settings look right and the battery still isn’t performing, an engineer can check the sensor, the settings and the battery’s health. Book a solar system inspection and we’ll find out what’s holding it back.
Request a battery quotation
Whether or not you already have solar panels, send your details and we’ll call you back to talk through the options and arrange a survey.
We install across London and up to around 50 miles out.
Latest Articles
Ready to Start Saving with Solar?
Get your free no-obligation quote today. Our experts will design the perfect system for your home.
Free Home Survey
MCS Certified
Reply in 1 Working Day
Quick Links
Services
Contact
© 2026 Solar Panels London. All rights reserved.
SOLAR PANELS LONDON (SPL) LIMITED, registered in England and Wales, company number 14360308. Registered Office, 20 Rosslyn Crescent, Luton, LU3 2AU. SOLAR PANELS LONDON (SPL) LIMITED is an Introducer Appointed Representative of Shermin Finance Limited, FRN 727594, company number 01276121. Registered Office, Homeserve, Cable Drive, Walsall, WS2 7BN. Shermin Finance Limited act as a credit broker and is not a lender. Credit is subject to status and affordability.









