Rated 4.8 on Trustpilot

Read Reviews

Illustration of solar panels with microinverters connected to a battery

·

Battery Storage

Adding a Battery to a Microinverter Solar System

A microinverter system has no central inverter to swap for a hybrid, so a battery is added alongside it on the AC side. Here is how that works and what to check first.

By

Solar Panels London

·

Last reviewed

Yes, you can add a battery to a solar system that uses microinverters. Because each panel already has its own small inverter producing AC electricity, there is no central inverter to replace with a hybrid. Instead, the battery is added on the AC side with its own battery inverter, known as AC coupling. Your microinverters carry on as before. The main things to check are the network operator limits, where the battery will go, and what you expect it to do in a power cut.

Key points

  • Microinverter systems turn each panel’s output into AC on the roof, so a battery is added on the AC side.

  • An AC-coupled battery leaves the microinverters untouched.

  • Some AC-coupled inverters, including Solis’s S6 AC-coupled range, are designed to add storage to solar systems of any brand.

  • Enphase also makes its own battery for Enphase systems.

  • In a power cut, grid-connected microinverters switch off for safety. Backup needs to be designed in.

  • On Feed-in Tariff systems, AC coupling normally leaves the generation meter unaffected.

How a microinverter system is different

On a string system, all the panels feed DC electricity to one inverter on a wall, and that inverter can be swapped for a hybrid that also runs a battery. On a microinverter system, each panel has its own small inverter underneath it on the roof, and AC electricity comes down to the house. Enphase is the best-known brand.

Replacing all the microinverters just to add a battery would mean roof work and usually wouldn’t make sense. AC coupling avoids that.

Illustration comparing a string inverter system with one central inverter and a microinverter system with an inverter under each panel

How an AC-coupled battery works

An AC-coupled battery has its own inverter and connects to your home’s wiring near the consumer unit. A sensor (CT clamp) at the supply meter tells it when your home is exporting surplus solar. It charges from that surplus and discharges when the house needs power.

Solis describes its S6 AC-coupled inverters as suitable for adding storage to “any brand” of solar system. We usually upgrade customers to Solis, FoxESS or Hanchu equipment. Our Solis guide and Hanchu battery guide explain both ranges. Our guide to adding a battery to existing solar panels explains AC coupling in more detail.

Enphase’s own battery

Enphase makes its own IQ Battery for Enphase systems, managed in the same app as the microinverters. According to Enphase’s UK planning guide, IQ7 microinverters are compatible with its IQ Battery 5P, and full backup needs its IQ System Controller. It’s one option to compare. We’ll talk you through both routes at survey.

Request a battery retrofit quotation

Already have solar panels? Send your details and we’ll call you to talk through adding a battery.

We install across London and up to around 50 miles out.

About your system (optional, helps us prepare)

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

What happens in a power cut

Solar systems connected to the grid are designed to switch off in a power cut, so they don’t send electricity into cables that engineers may be working on. Microinverters do this too.

That affects backup in two ways:

  • An AC-coupled battery with a backup output can keep selected circuits running for a while, from what is stored.

  • The microinverters won’t recharge the battery during the cut unless the system is designed to create its own local grid and isolate the house safely.

If backup matters to you, tell us at the start so we can design for it. Our guide to what keeps working in a power cut explains the options.

Illustration of a house in a power cut, with the grid disconnected and a battery supplying one backup circuit

What to check before you go ahead

  1. Network operator limits. Under G98, the total inverter capacity at your property, including the new battery inverter, counts towards the limit for simple notification. Above it, a G99 application or export limiting may be needed. Our guide to DNO rules and export limits explains this.

  2. Where the battery goes. Close to the consumer unit is simplest. Our guide to where a home battery can be installed explains the safety rules.

  3. How much capacity. Based on your evening and overnight use. Our guide to what size battery you need helps here.

  4. Monitoring. Your microinverter app will still show solar generation. The battery has its own app.

  5. Feed-in Tariff. If you’re on the scheme, tell your FIT licensee before and after. Our guide to keeping your Feed-in Tariff when you upgrade explains what to tell them.

If some microinverters have failed

Microinverters can fail individually, which shows up as one or two panels producing nothing. That can be fixed separately from adding a battery, and it’s worth fixing first so the battery has the full surplus to work with. Our guide to why solar is generating less than it used to explains how to spot it.

Frequently asked questions

Do I have to replace my microinverters to add a battery?

No. An AC-coupled battery works alongside them. Replacing microinverters is only worth considering if they are failing or no longer supported.

Will a non-Enphase battery work with my Enphase system?

An AC-coupled battery works on the AC side and reads the meter, so it doesn’t need to talk to the microinverters. Solis describes its AC-coupled range as suitable for any brand of solar. We check your system at survey before recommending one.

Can a battery on a microinverter system charge overnight on a cheap tariff?

Yes. AC-coupled batteries can charge from the grid on a schedule, as well as from your solar surplus. Our guide to Octopus Flux and overnight charging explains how.

Can you add a battery to a microinverter system you didn’t install?

Yes. We add batteries to systems installed by other companies, and we can work with the existing paperwork. Our guide to what to do when your installer has gone bust helps if the original installer has gone.

Add a battery to your system

Our battery retrofit and solar upgrade service covers microinverter systems as well as string and optimiser systems. Request a battery retrofit quotation and we’ll recommend the right setup for your home.

Request a battery quotation

Whether or not you already have solar panels, send your details and we’ll call you back to talk through the options and arrange a survey.

We install across London and up to around 50 miles out.

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

Latest Articles

Ready to Start Saving with Solar?

Get your free no-obligation quote today. Our experts will design the perfect system for your home.

Free Home Survey

MCS Certified

Reply in 1 Working Day

© 2026 Solar Panels London. All rights reserved.

SOLAR PANELS LONDON (SPL) LIMITED, registered in England and Wales, company number 14360308. Registered Office, 20 Rosslyn Crescent, Luton, LU3 2AU. SOLAR PANELS LONDON (SPL) LIMITED is an Introducer Appointed Representative of Shermin Finance Limited, FRN 727594, company number 01276121. Registered Office, Homeserve, Cable Drive, Walsall, WS2 7BN. Shermin Finance Limited act as a credit broker and is not a lender. Credit is subject to status and affordability.