Rated 4.8 on Trustpilot

Read Reviews

Illustration of a stacked inverter and battery unit standing in a garage

·

Battery Storage

Sigenergy SigenStor: A Plain-English Guide

SigenStor stacks a hybrid inverter and battery modules into one tower. Here is how it works, how far it can be extended, and what the Sigen Gateway adds for power cuts.

By

Solar Panels London

·

Last reviewed

Sigenergy’s SigenStor is a stacked home energy system. A hybrid inverter, which Sigenergy calls the Energy Controller, sits on top of one or more battery modules, all in a single tower. Solar panels connect to the controller, and you add battery modules to the stack to increase storage. For whole-home backup, it pairs with the Sigen Gateway. Sigenergy is one of the brands we install, alongside Solis, FoxESS, Hanchu, Tesla and SolarEdge.

Key points

  • SigenStor stacks a hybrid inverter and battery modules into one tower.

  • Single-phase Energy Controllers range from about 3 to 12 kW, and three-phase versions go higher.

  • We fit 6 kWh and 10 kWh battery modules, and Sigenergy allows up to six modules per controller.

  • Whole-home backup uses the Sigen Gateway, with a published switchover of 2 milliseconds on the single-phase Gateway Home.

  • The system is rated IP66 and is monitored through the mySigen app.

How it fits together

The Energy Controller. This is the hybrid inverter. It takes power from the solar panels, runs the house and charges the batteries. Sigenergy’s single-phase range covers about 3 to 12 kW, and there are three-phase models for larger homes. Our guide to three-phase solar and batteries explains when that applies.

The battery modules. These stack underneath the controller. We fit 6 kWh and 10 kWh modules. Sigenergy’s datasheet allows from one to six modules per controller, so storage can grow with your needs.

The Sigen Gateway. An optional unit that gives whole-home backup in a power cut.

The app. mySigen shows generation, use, battery level and grid import and export, and can schedule charging around your tariff.

Illustration of battery modules being added one at a time to a stacked battery tower

Adding storage later

Because the modules stack, adding capacity later is usually simple: another module goes on the stack, within the controller’s limit. That suits homes expecting an electric car, a heat pump or more people. Our guide to adding more battery storage to an existing system explains the options in general.

Whole-home backup with the Sigen Gateway

A battery on its own doesn’t keep a house running in a power cut. The Sigen Gateway sits between the grid supply and your consumer unit. When the grid fails, it disconnects the house and lets the SigenStor supply it. Sigenergy’s published switchover time for the single-phase Gateway Home is 2 milliseconds, quick enough that most electronics won’t notice.

The gateway is a switch, not a power source. What the house can draw during the outage is still limited by the controller’s output and the energy in the batteries. Sigenergy also states the gateway must be used with a Sigen Energy Controller and Sigen batteries. Our guide to what keeps working in a power cut explains how to think about backup.

Request a battery quotation

Whether or not you already have solar panels, send your details and we’ll call you back to talk through the options and arrange a survey.

We install across London and up to around 50 miles out.

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

Where it can go

The SigenStor is rated IP66 and Sigenergy lists a wide operating temperature range, so it can be installed in a garage or outside on a suitable wall. It still has to follow the placement guidance for home batteries. Our guide to where a home battery can be installed explains the rules.

Illustration of a house in a power cut where a gateway box keeps the whole home supplied from the battery

New systems and existing solar

SigenStor is a hybrid system, so it suits new installations where the panels connect straight to the controller, or homes replacing an old inverter at the same time as adding a battery. If your existing inverter is working well and you’d rather keep it, an AC-coupled battery may suit you better. Our guide to adding a battery to existing solar panels compares the routes, and our battery retrofit and solar upgrade service covers both.

Is SigenStor right for you?

SigenStor suits homes that want a tidy all-in-one tower, easy expansion and fast whole-home backup. Like any system, the right choice depends on your usage, your supply and where the equipment can go. Our guides to the Tesla Powerwall 3, Solis inverters and batteries and Hanchu batteries cover the alternatives. We’ll tell you why we’ve recommended one over another.

Frequently asked questions

How many battery modules can a SigenStor have?

Sigenergy’s datasheet allows up to six modules per Energy Controller. The right number depends on your evening and overnight use. Our guide to what size battery you need explains how to work it out.

Does SigenStor work with a cheap overnight tariff?

Yes. The mySigen app can schedule charging and discharging around time-of-use tariffs. Our guide to Octopus Flux and overnight charging explains how these tariffs work.

Do I need the Sigen Gateway?

Only if you want backup in a power cut. Without it, the system works normally whenever the grid is on.

What warranty does SigenStor have?

SigenStor is sold with a 10-year warranty as standard, subject to Sigenergy’s terms. We confirm the current terms for your system at quote stage and register it at installation.

Get a SigenStor quote

Request a battery quotation and we’ll look at your usage, your supply and where the system can go, and tell you whether SigenStor suits your home.

Request a battery quotation

Whether or not you already have solar panels, send your details and we’ll call you back to talk through the options and arrange a survey.

We install across London and up to around 50 miles out.

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

Latest Articles

Ready to Start Saving with Solar?

Get your free no-obligation quote today. Our experts will design the perfect system for your home.

Free Home Survey

MCS Certified

Reply in 1 Working Day

© 2026 Solar Panels London. All rights reserved.

SOLAR PANELS LONDON (SPL) LIMITED, registered in England and Wales, company number 14360308. Registered Office, 20 Rosslyn Crescent, Luton, LU3 2AU. SOLAR PANELS LONDON (SPL) LIMITED is an Introducer Appointed Representative of Shermin Finance Limited, FRN 727594, company number 01276121. Registered Office, Homeserve, Cable Drive, Walsall, WS2 7BN. Shermin Finance Limited act as a credit broker and is not a lender. Credit is subject to status and affordability.