Rated 4.8 on Trustpilot

Read Reviews

Illustration of a slim white home battery mounted on the side wall of a house

·

Battery Storage

Tesla Powerwall 3: A Plain-English Guide for UK Homes

The Powerwall 3 is a battery with a solar inverter built in. Here is what that means for a new system, how it can be added to existing solar, and what you need for power-cut backup.

By

Solar Panels London

·

Last reviewed

The Tesla Powerwall 3 is a home battery with a solar inverter built in. On a new installation, your solar panels connect straight to it, so you don’t need a separate solar inverter. It can also be added to an existing solar system alongside the inverter you already have. Each unit stores 13.5 kWh of usable energy, and power-cut backup needs Tesla’s Backup Gateway as well. Tesla is one of the brands we install, alongside Solis, FoxESS, Hanchu, Sigenergy and SolarEdge.

Key points

  • Powerwall 3 combines a battery and a hybrid solar inverter in one unit.

  • Tesla lists 13.5 kWh of usable energy per unit, and extra Expansion units can be added.

  • It works with new solar panels connected directly, or with existing solar through AC coupling.

  • Backup in a power cut needs Tesla’s Backup Gateway 2.

  • Tesla’s 10-year warranty depends on the Powerwall staying connected to the internet.

  • The output setting affects what the network operator needs to approve.

How Powerwall 3 differs from earlier Powerwalls

Earlier Powerwalls were AC batteries: they always needed a separate solar inverter, and the battery had its own inverter just for charging and discharging. Powerwall 3 adds a solar inverter inside the unit. According to Tesla’s datasheet, it has three solar inputs (MPPTs) and accepts up to 20 kW of panels.

That means a new system can be simpler: panels, Powerwall 3 and the gateway, rather than panels, a solar inverter, a battery and a gateway. Our guide to what a hybrid inverter is explains the idea.

Illustration of solar panels wired straight into a battery unit with a built-in inverter, then to the house

What Tesla’s datasheet says

  • Capacity: 13.5 kWh usable per unit.

  • Expansion: Expansion units add 13.5 kWh each.

  • Output: a nominal output from 3.68 kW up to 11.04 kW, depending on how it is configured.

  • Solar input: three MPPTs, up to 20 kW of panels.

  • Location: rated for indoor or outdoor mounting, with an operating range of minus 20 to 50°C. Tesla notes that performance may be reduced above 40°C.

  • Warranty: 10 years, provided the Powerwall is reliably connected to the internet.

We check the current datasheet and warranty terms when we quote, as Tesla updates them.

Adding Powerwall 3 to existing solar

If you already have solar panels and a working inverter, Powerwall 3 can be added on the AC side. Tesla’s datasheet includes a layout for “AC coupled solar”, using a sensor on the existing solar output. Your existing inverter keeps running the panels, and the Powerwall charges from the surplus.

On Feed-in Tariff systems, an AC-coupled battery normally leaves the generation meter unaffected, subject to checking your system. Our guide to adding a battery to existing solar panels explains the two retrofit routes, and our guide to keeping your Feed-in Tariff when you upgrade covers the paperwork.

Request a battery quotation

Whether or not you already have solar panels, send your details and we’ll call you back to talk through the options and arrange a survey.

We install across London and up to around 50 miles out.

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

Backup in a power cut

Powerwall 3 doesn’t provide backup on its own. Tesla’s Backup Gateway 2 is needed: it detects the outage, disconnects the house from the grid and lets the Powerwall supply the circuits behind it. That can be selected circuits or most of the house, depending on how it is wired and the size of your supply.

What you can run is still limited by the Powerwall’s output and the energy stored. Our guide to what keeps working in a power cut explains the difference between partial and whole-home backup.

Expansion units

If you need more storage, Expansion units add capacity without adding more inverter power. They suit homes with high evening and overnight use, electric cars or heat pumps. Our guide to what size battery you need helps you decide whether one Powerwall is enough.

Illustration of a main battery unit with two matching expansion units beside it

The network operator

The Powerwall’s output setting counts towards the limit for simple G98 notification, together with any existing solar inverter. Larger outputs, or a Powerwall added to an existing system, may need a G99 application or export limiting. Our guide to DNO rules and export limits explains this.

Is Powerwall 3 right for you?

Powerwall 3 suits homes that want a single, tidy unit with a well-known app, good backup options with the gateway, and room to add capacity. It is a large unit, so it needs a suitable wall, inside or out. Our guide to where a home battery can be installed explains the placement rules.

It isn’t the only good option. Our guides to Sigenergy SigenStor, Solis inverters and batteries, Hanchu batteries and FoxESS batteries cover the other ranges we fit. We recommend the system that suits your house and usage, and explain why.

Frequently asked questions

Does Powerwall 3 need a separate solar inverter?

Not on a new system: the panels connect straight to it. On an existing system, you can keep your current solar inverter and add Powerwall 3 alongside it.

Can Powerwall 3 charge overnight on a cheap tariff?

Yes. It can be set to charge from the grid at off-peak times. Our guide to Octopus Flux and overnight charging explains how these tariffs work with a battery.

Does it work without the internet?

It keeps working, but Tesla’s warranty requires the Powerwall to be reliably connected to the internet, and you’ll lose app monitoring while it’s offline.

Will it power my whole house in a power cut?

With Backup Gateway 2, it can supply most or all of the house, but only up to its output and for as long as the stored energy lasts. Heavy loads such as electric showers and ovens empty it quickly.

Get a Powerwall quote

We’ll look at your usage, your roof or existing system, where the Powerwall can go and what backup you want. Request a battery quotation and we’ll tell you whether Powerwall 3 or another system suits your home better.

Request a battery quotation

Whether or not you already have solar panels, send your details and we’ll call you back to talk through the options and arrange a survey.

We install across London and up to around 50 miles out.

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

Latest Articles

Ready to Start Saving with Solar?

Get your free no-obligation quote today. Our experts will design the perfect system for your home.

Free Home Survey

MCS Certified

Reply in 1 Working Day

© 2026 Solar Panels London. All rights reserved.

SOLAR PANELS LONDON (SPL) LIMITED, registered in England and Wales, company number 14360308. Registered Office, 20 Rosslyn Crescent, Luton, LU3 2AU. SOLAR PANELS LONDON (SPL) LIMITED is an Introducer Appointed Representative of Shermin Finance Limited, FRN 727594, company number 01276121. Registered Office, Homeserve, Cable Drive, Walsall, WS2 7BN. Shermin Finance Limited act as a credit broker and is not a lender. Credit is subject to status and affordability.