Rated 4.8 on Trustpilot

Read Reviews

Illustration of a farm barn with solar panels on its roof beside a farmhouse

·

Commercial & New Build

Solar Panels for Farms: Barn Roofs, Ground Arrays and Grid Connections

Farm buildings often have big roofs and daytime electricity use, which suits solar. What to check on barns and sheds, when ground arrays make sense, and how planning and the grid work.

By

Solar Panels London

·

Last reviewed

Solar can work well on farms because many have large unshaded roofs on barns, sheds and stores, and plenty of daytime electricity use from cold stores, workshops, pumps, dryers and milking equipment. Most farm projects start with the roofs, which can often be fitted without a planning application. Ground-mounted arrays are an option where roof space runs out, but they usually need planning permission beyond small systems. On rural sites the grid connection is often the deciding factor, so it is worth checking early.

This guide explains what to check on agricultural buildings, when ground arrays make sense, and how planning and grid connections work. For our approach to farm and rural sites, see our solar for agriculture page.

Key points

  • Roof-mounted solar on agricultural buildings is often permitted development, within set limits.

  • Older farm buildings frequently have fibre cement roofs, which are usually fragile and may contain asbestos.

  • Ground-mounted arrays beyond a small stand-alone installation usually need planning permission.

  • Rural networks can have limited capacity, so larger systems may face export limits or network works.

  • Solar is worth most when the electricity is used on the farm, so match the system to your daytime loads.

  • Farm systems are business installations, so standard-rate VAT applies.

Where farms use electricity

Illustration of farm equipment that uses electricity in daylight, including a cold store, a pump and a workshop

The value of solar depends on how much of the generation is used on site rather than exported. Farm loads that run in daylight include:

  • Cold stores and chillers, which run hardest on warm, sunny days.

  • Grain and crop drying.

  • Workshops, welding and machinery charging.

  • Water and irrigation pumps.

  • Lighting and ventilation in livestock buildings.

  • Milking and milk cooling, though early morning and evening milking falls partly outside solar hours.

If a lot of use happens early or late, a battery can store surplus daytime generation for later. Our commercial battery storage page explains when that pays off. Half-hourly electricity data, which your supplier can usually provide, shows how your use lines up with solar generation.

Barn and shed roofs

Agricultural buildings come in every age and condition, so each roof needs assessing.

Modern steel-framed buildings with profiled metal roofs are often straightforward, with rails clamped or fixed to the roof sheet. The checks are the same as for any industrial roof: the sheet, the fixings and the structure. Our guide to solar on warehouse and industrial roofs covers them in detail.

Older buildings with fibre cement roofs need more care. Fibre cement is usually fragile, and sheets fitted before 2000 may contain asbestos, so the roof needs identifying and surveying before any work. Replacing the roof first is often the better long-term answer, and doing it alongside solar avoids paying for access twice.

Open-sided and lightweight structures may not be designed for extra roof load. A structural check confirms what the frame can carry, including wind uplift, which is often higher on exposed rural sites.

Roof orientation matters less than people expect. East and west facing roofs still generate well across the day, which can suit farms with loads spread from morning to evening. Our guide to why panel position matters explains the trade-offs.

Ground-mounted arrays

Illustration of a ground-mounted solar array in a field next to farm buildings

Where roofs are too small, shaded, fragile or not worth upgrading, panels can be mounted on frames in a field or yard. Ground arrays are easy to orientate perfectly and easy to maintain, but they take up land and need a cable run back to the building or supply point, and that distance affects the design. Our guide to ground-mounted solar panels covers the basics.

Planning is the main difference from roof systems. Only a small, first stand-alone installation in the grounds of a non-domestic building is permitted development, and larger arrays need a planning application. Using productive farmland for larger arrays is a sensitive planning issue, so the local planning authority will look at land quality, landscape and visual impact.

Planning for roof systems

Solar on the roofs of agricultural buildings is often permitted development, so it doesn’t need a planning application, provided it meets the limits on how far the panels project from the roof and how close they sit to the edges. Listed buildings, buildings within the grounds of a listed building, scheduled monuments, and roof slopes facing a highway in conservation areas, National Landscapes (formerly Areas of Outstanding Natural Beauty) and national parks have extra restrictions. Many sites within 50 miles of London fall into one of these areas, so we check this during the assessment. A Lawful Development Certificate from the local planning authority gives formal confirmation if you want it.

Request a commercial solar assessment

Tell us about your premises and we’ll call you back to talk through solar and battery storage for your site.

We install across London and up to around 50 miles out.

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

The grid connection

Rural electricity networks are often less able to take extra generation than urban ones. Many farms have a three-phase supply, which helps, but the local network still sets how much can be exported. Larger systems need a G99 application, and the network operator may approve the full export, set an export limit, or require network works first. Our guide to commercial solar and G99 explains the process, and our guide to three-phase solar and battery systems explains how three-phase supplies affect the design.

If the farm has several supplies, such as one for the farmhouse and one for the yard, the system is usually connected to the supply with the highest daytime use. A system on a separate farmhouse supply is a domestic installation and is assessed differently.

Costs, tax and rates

Every farm system is designed and priced for the site. Our guide to what affects the cost of commercial solar explains the main factors, from roof condition to grid works. Farm businesses may be able to claim capital allowances on solar, and plant and machinery used for onsite renewable generation is currently exempt from business rates in England until March 2035. Our guide to capital allowances for solar panels explains the basics, and your accountant should confirm how they apply to your business.

FAQs

Can solar go on an asbestos barn roof?

Only after the roof has been surveyed and the risk assessed, and fitting directly onto old asbestos cement sheets is often not the best option. Replacing the roof first is usually the safer long-term choice.

Do I need planning permission for solar on a barn?

Often not, if the installation meets the permitted development limits and the building isn’t listed or in a restricted location. We check this for your site.

Can solar power the farmhouse as well?

Only if the farmhouse is on the same supply, or has its own system. Where the house and yard have separate supplies, the design depends on which supply uses the most electricity during the day.

Will livestock or dust affect the panels?

Dust, bird droppings and ammonia from livestock buildings can make panels dirtier than on other buildings. A cleaning and inspection routine helps. See our guide to whether solar panels need cleaning.

Request a commercial solar assessment

Tell us about your premises and we’ll call you back to talk through solar and battery storage for your site.

We install across London and up to around 50 miles out.

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

Latest Articles

Ready to Start Saving with Solar?

Get your free no-obligation quote today. Our experts will design the perfect system for your home.

Free Home Survey

MCS Certified

Reply in 1 Working Day

© 2026 Solar Panels London. All rights reserved.

SOLAR PANELS LONDON (SPL) LIMITED, registered in England and Wales, company number 14360308. Registered Office, 20 Rosslyn Crescent, Luton, LU3 2AU. SOLAR PANELS LONDON (SPL) LIMITED is an Introducer Appointed Representative of Shermin Finance Limited, FRN 727594, company number 01276121. Registered Office, Homeserve, Cable Drive, Walsall, WS2 7BN. Shermin Finance Limited act as a credit broker and is not a lender. Credit is subject to status and affordability.