Rated 4.8 on Trustpilot
Read Reviews


·
Faults & Servicing
SolarEdge Problems and Your Upgrade Options
SolarEdge systems have an optimiser behind each panel as well as the inverter, which changes how faults show up and how you upgrade. Here is what to check and what your options are.
By
Solar Panels London
·
Last reviewed
A SolarEdge system is built differently from a standard string system. Each panel has a small power optimiser behind it, and the inverter on the wall works with those optimisers to control the system. So when something goes wrong, the first question is which part has failed: one optimiser, a string of panels, or the inverter itself. The answer decides whether you need a repair on the roof, a new inverter, or an upgrade that adds a battery.
Key points
SolarEdge systems have three main parts: optimisers behind the panels, the inverter, and the monitoring.
A single optimiser fault usually shows up as one panel producing nothing in the monitoring.
An inverter fault usually shows up as the whole system producing nothing.
SolarEdge optimisers are designed to work with a SolarEdge inverter, so replacing the inverter with another brand normally means dealing with the optimisers too.
You can add a battery to a working SolarEdge system without changing the inverter, using a separate AC-coupled battery.
Which part has failed?
Look at your monitoring first. SolarEdge monitoring can show the output of each panel. One panel showing nothing while the rest work normally points to that panel’s optimiser, its connectors or the panel itself. A whole string showing nothing points to the cabling or a connection on that string. Everything showing nothing points to the inverter, the AC supply or the communication link.
If the monitoring has stopped updating, check whether the inverter is still running before assuming the worst. A changed Wi-Fi router is a common cause. Our guide to getting a monitoring app back online covers the usual fixes.

What you can safely check yourself
Check the inverter display or lights, and note any error message and when it appears.
Check the solar breaker in your consumer unit. Reset it once if it has tripped; if it trips again, leave it off.
Compare this month’s generation with the same month last year, from the app or your generation meter.
Photograph the inverter label and any error on screen.
Don’t open the inverter or switch the DC isolator on a guess, and don’t go on the roof. Optimisers sit behind the panels and can only be reached with safe roof access. Our guide to solar generating less than it used to explains how to judge whether a drop is a fault or the weather.
Your options
Replace a failed optimiser. If one or two optimisers have failed, they can be replaced individually. SolarEdge publishes rules on which newer optimiser models can be mixed with older ones in the same string, and the right model depends on your panels. It needs roof access, and on many London homes that means scaffolding. Our guide to scaffolding for solar panels in London explains what is involved.
Replace a failed SolarEdge inverter with another SolarEdge inverter. This keeps the optimisers in place and is often the least disruptive fix. We still install and service SolarEdge inverters for this reason.
Replace the whole system’s electronics. If the inverter has failed and several optimisers are going too, it can make sense to remove the optimisers and fit a standard hybrid inverter. That needs roof access and a design check, because the string layout has to suit the new inverter, but it leaves you with a simpler system that is ready for a battery.
Request an inverter replacement quotation
Inverter failed or on its way out? Send your details and we’ll call you back to talk through the options.
We install across London and up to around 50 miles out.
Adding a battery to a SolarEdge system
Keep the SolarEdge inverter and add an AC-coupled battery. A separate battery inverter sits alongside the existing system and stores surplus solar for the evening. The SolarEdge side carries on as before, and nothing on the roof changes. We usually use Solis, FoxESS or Hanchu equipment for this.
Replace the inverter with a hybrid. If the SolarEdge inverter has failed, a hybrid inverter can run the panels and a battery together. As above, the optimisers usually need to come out, so it is a bigger job, but you end up with one modern system.

Our guide to adding a battery to existing solar panels explains AC-coupled and hybrid batteries in more detail, and our older guide to SolarEdge inverters and battery systems covers how SolarEdge’s own system works.
Feed-in Tariff and paperwork
If your SolarEdge system is on the Feed-in Tariff, tell your FIT licensee about any replacement or addition. An AC-coupled battery normally leaves your generation meter as it is. Replacing the inverter with a hybrid changes the metering, and our standard practice is to fit a bidirectional meter, subject to checking your system. Adding a battery also counts as generation for the network operator. Our guide to DNOs and export limits explains when approval is needed first.
For how a SolarEdge system works day to day, including reading the app and adding panels, see our guide for SolarEdge owners.
Frequently asked questions
One panel shows zero in my SolarEdge app. What does it mean?
Usually a fault with that panel’s optimiser, its connectors or the panel itself. It needs an engineer with safe roof access to test and replace the faulty part.
Can I replace my SolarEdge inverter with a different brand?
Yes, but the optimisers are designed for SolarEdge inverters, so they normally need removing or replacing at the same time. A like-for-like SolarEdge inverter avoids that.
Can I add a battery without changing anything on the roof?
Yes. An AC-coupled battery is connected on the AC side, next to your consumer unit, and leaves the panels and optimisers untouched.
Do you work on SolarEdge systems you didn’t install?
Yes. We inspect, repair and upgrade SolarEdge systems whoever fitted them, across London and up to around 50 miles out.
Request a battery retrofit quotation. Tell us what your SolarEdge system is doing and we’ll explain the options, from a single optimiser to a full upgrade with a battery.
Book a solar system inspection
Tell us what’s happening and one of our team will call you back to arrange a visit.
We install across London and up to around 50 miles out.
Latest Articles
Ready to Start Saving with Solar?
Get your free no-obligation quote today. Our experts will design the perfect system for your home.
Free Home Survey
MCS Certified
Reply in 1 Working Day
Quick Links
Services
Contact
© 2026 Solar Panels London. All rights reserved.
SOLAR PANELS LONDON (SPL) LIMITED, registered in England and Wales, company number 14360308. Registered Office, 20 Rosslyn Crescent, Luton, LU3 2AU. SOLAR PANELS LONDON (SPL) LIMITED is an Introducer Appointed Representative of Shermin Finance Limited, FRN 727594, company number 01276121. Registered Office, Homeserve, Cable Drive, Walsall, WS2 7BN. Shermin Finance Limited act as a credit broker and is not a lender. Credit is subject to status and affordability.









