Rated 4.8 on Trustpilot

Read Reviews

Illustration of the things that shape a battery retrofit: a house with solar panels, a battery, an inverter, cabling and a consumer unit

·

Battery Storage

What Affects the Cost of a Battery Retrofit or Inverter Upgrade?

A battery retrofit or inverter upgrade is usually simpler than a new installation, but the price still depends on a handful of things. Here is what each one means for your quote.

By

Solar Panels London

·

Last reviewed

The cost of a battery retrofit depends mostly on four things: which route you take (keeping your existing inverter or replacing it), how much battery capacity you want, where the battery goes, and what the electrical installation needs. Most retrofits don’t need scaffolding, which keeps them simpler than a new solar installation. We quote every retrofit individually after a survey, because the existing system and the house both make a difference.

Key points

  • The route matters: an AC-coupled battery keeps your inverter, while a hybrid replaces it.

  • Battery capacity is the biggest equipment choice.

  • A battery close to the consumer unit is simpler than one at the far end of the house.

  • Backup power for a power cut adds wiring, and whole-home backup adds equipment.

  • Older consumer units, meters on Feed-in Tariff systems and grid paperwork can all add work.

  • Batteries added to existing solar in a home are currently zero-rated for VAT, until 31 March 2027.

1. The route: keep the inverter or replace it

There are two ways to add a battery to an existing solar system.

Keep the inverter (AC-coupled). A separate battery inverter is added alongside your existing one. Your solar inverter is left alone. This is usually the simplest choice when the existing inverter is working well, and it normally leaves a Feed-in Tariff generation meter unaffected.

Replace the inverter (hybrid). The old inverter comes off and a hybrid inverter runs both the panels and the battery. This makes sense when the old inverter is failing, out of support or near the end of its life, because you replace it once rather than paying for a separate battery inverter now and a new solar inverter later.

Our guide to adding a battery to existing solar panels explains both routes. We usually upgrade customers to Solis, FoxESS or Hanchu equipment, and we also install Sigenergy, Tesla and SolarEdge. Our Solis guide and Hanchu battery guide explain those ranges.

Illustration of the two retrofit routes: keeping the old inverter with a separate battery inverter, or replacing it with a hybrid

2. How much battery capacity

Capacity is measured in kilowatt hours (kWh). More capacity means more equipment. The right size depends on how much you use in the evening and overnight, your tariff, and whether you plan to add an electric car or heat pump. Our guide to what size battery you need explains how to work it out. Some batteries are modular, so you can start smaller and add more later. Our guide to adding more battery storage explains when that works.

3. Where the battery goes

The simplest installation puts the battery and its inverter close to the consumer unit and meter, for example in a garage or utility room next to them. A battery at the far end of the house, or outside on a different wall, needs a longer cable run and more labour. Placement also has to follow safety guidance on escape routes and ventilation. Our guide to where a home battery can be installed explains the rules.

Illustration of a battery placed close to the consumer unit compared with a battery at the far end of a house with a long cable run

Request a battery retrofit quotation

Already have solar panels? Send your details and we’ll call you to talk through adding a battery.

We install across London and up to around 50 miles out.

About your system (optional, helps us prepare)

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

4. The electrical installation

  • Consumer unit. An older fuse box may need upgrading or extra space for new protective devices.

  • Meters. On Feed-in Tariff systems, replacing the inverter with a hybrid changes how generation is measured. Our standard practice is to fit a bidirectional meter in that case, subject to checking your system. Some systems also need an import and export meter.

  • Monitoring sensors. The battery needs a current sensor (CT clamp) at the supply meter so it knows when you are importing and exporting.

  • Three-phase supplies need three-phase equipment. Our guide to three-phase solar and batteries explains the differences.

5. Backup power

A standard battery doesn’t keep your home running in a power cut. Backup needs extra work:

  • Backup for selected circuits (often called EPS) needs a separate backup circuit and changeover wiring.

  • Whole-home backup needs a backup gateway or changeover switch that isolates the house from the grid during a cut.

Our guide to what keeps working in a power cut explains what each option gives you.

6. Grid paperwork

Your network operator (DNO) needs to know about a battery. Under the G98 rules, the total capacity of all the inverters at a property, including the battery inverter, counts towards the limit for simple notification. If your existing solar plus the new battery go over it, a G99 application or export limiting may be needed, which adds time. Our guide to DNO rules and export limits explains this.

If you’re on the Feed-in Tariff, your FIT licensee should be told before and after the work. Our guide to keeping your Feed-in Tariff when you upgrade covers what to tell them.

7. Anything else that needs fixing

A retrofit is a good time to deal with other problems, and the survey often finds them:

VAT

Installing a battery in a home, including adding one to an existing solar system, is currently zero-rated for VAT in Great Britain until 31 March 2027. Our guide to VAT on solar panels and batteries explains what is covered.

Frequently asked questions

Is it cheaper to add a battery or replace the inverter with a hybrid?

It depends on your existing inverter. If it works well and has years left, keeping it and adding an AC-coupled battery usually makes sense. If it is old or failing, replacing it with a hybrid avoids paying twice. We look at the inverter’s age and condition at survey before recommending a route.

Do I need scaffolding to add a battery?

Usually not, because the work is indoors or on a wall at ground level. Scaffolding is only needed if roof work is involved, such as bird-proofing or panel repairs.

Can you add a battery to a system you didn’t install?

Yes. We add batteries to systems installed by other companies, including older Feed-in Tariff systems. If the original installer has gone, our guide to what to do when your installer has gone bust explains how to gather the paperwork.

How long does a retrofit take?

Most single-battery retrofits are completed in a day. A G99 application, if needed, takes longer than the installation itself, and we give you the expected timeline at quote stage.

Get an accurate retrofit quote

Our battery retrofit and solar upgrade service starts with a survey of your existing system. Request a battery retrofit quotation and we’ll recommend the route that suits your system and your home.

Request a battery quotation

Whether or not you already have solar panels, send your details and we’ll call you back to talk through the options and arrange a survey.

We install across London and up to around 50 miles out.

No obligation. We’ll call you back within one working day (Mon–Fri, 9am–5pm). We only use your details to deal with your enquiry. See our privacy policy.

Latest Articles

Ready to Start Saving with Solar?

Get your free no-obligation quote today. Our experts will design the perfect system for your home.

Free Home Survey

MCS Certified

Reply in 1 Working Day

© 2026 Solar Panels London. All rights reserved.

SOLAR PANELS LONDON (SPL) LIMITED, registered in England and Wales, company number 14360308. Registered Office, 20 Rosslyn Crescent, Luton, LU3 2AU. SOLAR PANELS LONDON (SPL) LIMITED is an Introducer Appointed Representative of Shermin Finance Limited, FRN 727594, company number 01276121. Registered Office, Homeserve, Cable Drive, Walsall, WS2 7BN. Shermin Finance Limited act as a credit broker and is not a lender. Credit is subject to status and affordability.